Penurunan Defect Miss Insert Pada Proses Housing Dengan Metode Plan-Do-Check-Action (PDCA) di PT XYZ

Authors

  • Muhamad Mirfak Arfan STT Texmaco
  • RM Sugengriadi
  • Andrea Nurul Azmi Naupal

Keywords:

quality, ddefect

Abstract

This research aims to decrease defective products in PT. XYZ. PT XYZ, a manufacturing company that produces wiring harness products for motorized vehicles, is very concerned about the quality of its products. However, there are still wiring harness products that experience defects, especially in the housing process. Based on defects data in the housing process from August, September and October 2022, defects caused by miss inserts are the highest of the 6 other types of defects, namely 367 units or 44% of all defects. Therefore, the purpose of this study is to identify the causes of defects due to miss inserts and how to make improvements. This study uses the PDCA (Plan-Do-Check-Action) method with Pareto diagrams, fishbone diagrams, and the 5W+IH method. The results of the study show that improvements to workers and work methods can reduce defects due to miss inserts. This can be seen from the decrease in defects in the housing process in November, December 2022 and January 2023 by 253 units with a total percentage of 43%. These results are above the target of PT. XYZ to reduce defects due to miss insert by 10%.

References

Juran, Joseph M. (1998). Juran’s Quality Handbook 5th edition. New York: McGraw-Hill

Mitra, Amitava (2016). Fundamentals of Quality Control and Improvement. Wiley

Isniah, S., Purba, HH. Debora, F., (2020). Plan Do Check Action (PDCA) Method: Literature

Review and Research Issue. Jurnal Sistem dan Manajemen Industri.Vol. 4(1), 72 -81

Fauza, Q., Kautsar, AP., (2018). Review Artikel Plan Do Check Action (PDCA) dalam

meningkatan kualitas pelayanan kesehatan di rumah sakit. Jurnal Farmaka, Vol.16 (3),

–243

Fridayanti, A. M., & Wachidah, L. (2022, July). Siklus PDCA (Plan, Do, Check, Act) untuk

Mengurangi Cacat Produk Sosis di PT. Serena Harsa Utama. In Bandung Conference

Series: Statistics (Vol. 2, No. 2, pp. 197-206).

Fatah, A., & Al-Faritsy, A. Z. (2021). Peningkatan dan Pengendalian Kualitas Produk dengan

Menggunakan Metode PDCA (Studi Kasus pada PT. X). Jurnal Rekayasa Industri

(JRI), 3(1), 21-30.s

Nelfiyanti, N., Casban, C., Puteri, R. A. M., Ramadhan, A. I., & Diniardi, E. (2020,

December). Penerapan PDCA Dalam Meminimasi Cacat Produk Scratch Di Line Assembly

Frame PT. XYZ. In Prosiding Seminar Nasional Penelitian LPPM UMJ (Vol. 2020).

Sokovic, M., D. Pavletic, K. Kern Pipan. (2010). Quality Improvement Methodologies PDCA

Cycles, RADAR Matrix, DMAIC and DFSS. Journal of Achievements in Material

and Manufacturing Engineering. Volume 43 Issue 1

Silva, Adriana S., Carla F. Medeiros, Raimundo Kennedy Vieira. (2017). Cleaner Production

and PDCA Cycle : Practical Application For Reducing The Cans Loss Index in a

Beverage Company. Journal of Cleaner Production, Vol. 150,324 -338

Yemima, O., Nohe, D. A., & Nasution, Y. N. (2014). Penerapan Peta Kendali Demerit dan

Diagram Pareto Pada Pengontrolan Kualitas Produksi (Studi Kasus: Produksi Botol Sosro

di PT. X Surabaya). Vol, 5, 197-202.

Assauri, Sofian. (2008). Manajemen Produksi dan Operasi. Jakarta: Fakultas Ekonomi

Universitas Indonesia.

Krisdayanti, S., & Moektiwibowo, H. (2018). Pengendalian kualitas komponen mobil

dengan metode SQC (statistical quality control). Jurnal Teknik Industri, 5(1).

Montgomery, Douglas C., (2016). Introduction to Statistical Quality Control. John Wiley

& Sons. Inc. USA

Elmas, M. S. H. (2017). Pengendalian kualitas dengan menggunakan metode statistical

quality control (SQC) untuk meminimumkan produk gagal pada toko roti barokah

bakery. Wiga: Jurnal Penelitian Ilmu Ekonomi, 7(1), 15-22.

Kho, B. (2018,). “QC Seven Tools (Tujuh Alat Pengendalian Kualitas)”Jakarta: PT.

Gramedia Pustaka Utama.

Murnawan, H. (2014). Perencanaan Produktivitas Kerja Dari Hasil Evaluasi Produktivitas

Dengan Metode Fishbone Di Perusahaan Percetakan Kemasan Pt. X. Jurnal Teknik

Industri HEURISTIC, 11(1), 27-46.

Utami, S., Djamal, AH. (2018). Implementasi Pengendalian Kualitas Produk XX Kaplet

pada proses pengemasan primer dengan penerapan konsep PCDA. Jurnal Integrasi

Sistem Industri. Vol.5 (2)

Khaerudin, D., & Rahmatullah, A. (2020). Implementasi Metode Pdca Dalam Menurunkan

Defect Sepatu Type Campus Di Pt. Prima Intereksa Indastri (Pin). Jurnal Sains Dan

Teknologi: Jurnal Keilmuan Dan Aplikasi Teknologi Industri, 20(1), 34.

Atmaja, L. T., Supriyadi, E., & Utaminingsih, S. (2018). Analisis Efektivitas Mesin Pressing

Ph-1400 Dengan Metode Overall Equipment Effectiveness (OEE) Di PT. Surya Siam

Keramik. Jurnal Teknologi Universitas Pamulang, 1(1).

Downloads

Published

2023-10-31

Issue

Vol. 2 No. 1 (2023): Teknik Terapan

Section

Articles

License

Copyright (c) 2023 Muhamad Mirfak Arfan, RM Sugengriadi, Andrea Nurul Azmi Naupal

Creative Commons License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.