Analisa Sikap Tubuh Operator Packing Pada Perakitan Wiring Harness Part No. 32100-K2V-N410 Di PT Piranti Dengan Metode Rapid Upper Limb Assessment (RULA)
Keywords:
Nordic Body Map, Work Posture, Rapid Upper Limb AssessmentAbstract
Work postures that are not ergonomic can cause various negative impacts on health, such as muscle pain, injury, and other health problems. It can also decrease productivity and quality of work. This study aims to analyze the work posture and level of risk for packing operators at PT. Device, a wiring harness assembly manufacturing company. This study used the NBM method to identify points of body fatigue and the RULA method to assess the risk of work posture. The results of the analysis showed that the packing operator experienced high complaints on the left and right calves. The average complaint rate was 64. RULA analysis shows that the highest level of risk in the activity of inserting a wiring harness into the box with a final score of 7 (red). Based on the results of the study, it is recommended to improve the work posture of packing operators, namely the provision of ergonomic training, and changes in workplace design. This advice is expected to address the posture issues of packing operators, provide valuable information for companies, and create better working conditions for operators.
References
E. Budiarti, E. Kamelia, and C. Nugroho, “HUBUNGAN ANTARA KARAKTERISTIK INDIVIDU DENGAN KELUHAN MUSKULOSKELETAL PETUGAS KESEHATAN GIGI DI PUSKESMAS KOTA TASIKMALAYA,” Jurnal Kesehatan Gigi, vol. 8, no. 1, pp. 37–42, 2021.
A. Hanif, “Hubungan antara Umur dan Kebiasaan Merokok dengan Keluhan Musculoskeletal Disorders (MSDs) pada Pekerja Angkat Angkut UD Maju Makmur Kota Surabaya,” Medical Technology and Public Health Journal, vol. 4, no. 1, pp. 7–15, 2020.
K. Wijaya, “Identifikasi Risiko Ergonomi dengan Metode Nordic Body Map Terhadap Pekerja Konveksi Sablon Baju,” in Seminar dan Konferensi Nasional IDEC, 2019, pp. 1–9.
W. Anggraini, dan Anda Mulya Pratama, D. Jurusan Teknik Industri, F. Sains dan Teknologi, U. SUSKA Riau, and M. Jurusan Teknik Industri, “ANALISIS POSTUR KERJA DENGAN MENGGUNAKAN METODE OVAKO WORKING ANALYSIS SYSTEM (OWAS) PADA STASIUN PENGEPAKAN BANDELA KARET (STUDI KASUS DI PT. RIAU CRUMB RUBBER FACTORY PEKANBARU),” 2012.
A. Tamala, “Pengukuran Keluhan Musculoskeletal Disorders (Msds) Pada Pekerja Pengolah Ikan Menggunakan Nordic Body Map (Nbm) dan Rapid Upper Limb Assessment (Rula),” Jurnal TIN Universitas Tanjungpura, vol. 4, no. 2, 2020.
N. M. Dewantari, “Risiko ergonomi pada pekerja pemilah sampah,” Journal Industrial Servicess, vol. 5, no. 2, pp. 194–198, 2020.
R. Rahmahwati, “Perbaikan Tingkat Risiko Musculoskeletal Disorders Berdasarkan Pendekatan Nordic Body Map dan Rapid Upper Limb Assessment Pada Hasil Rancang Bangun Mesin Roasting Kopi Digital Otomatis,” Jurnal Rekayasa Sistem Industri, vol. 10, no. 2, pp. 191–200, 2021.
J. E. S. Casym and D. N. Oktiara, “Analisis Postur Tubuh Pekerja Home Industry Pastel Menggunakan Analisis Rapid Upper Limb Assesment (RULA),” in Seminar Nasional Teknologi Komputer & Sains (SAINTEKS), 2020, pp. 631–635.
A. F. Sari, P. Yuliarty, and A. Wibowo, “Analisis Tingkat Risiko Pekerja Pada Poin Kerja Header Pipe Dengan Metode Rapid Entire Body Assessment (REBA) dan Rapid Upper Limb Assessment (RULA),” Penelitian Dan Aplikasi Sistem Dan Teknik Industri, vol. 13, no. 3, pp. 285–297, 2020.
L. McAtamney and E. N. Corlett, “RULA: a survey method for the investigation of work-related upper limb disorders,” Appl Ergon, vol. 24, no. 2, pp. 91–99, 1993.
N. Susanti and A. N. Septi, “Penyuluhan Fisioterapi Pada Sikap Ergonomis Untuk Mengurangi Terjadinya Gangguan Musculoskeletal Disorders (Msds) Di Komunitas Keluarga Desa Kebojongan,” PENA ABDIMAS: Jurnal Pengabdian Masyarakat, vol. 2, no. 1, 2021.
Y. Sianipar, “Berbagai manfaat dari upaya mempertahankan ergonomic pada berbagai posisi guna untuk keselamatan pasien,” 2020.
Downloads
Published
Issue
Section
License
Copyright (c) 2024 R.M. Sugengriadi, Deni A Taufik, Husni Abdul Matin
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
